EV-ready planning
Make room for charging with a service and circuit plan designed around your home.
ENERGIZING THE PNW
Electrical Panel
& Meter Upgrades.
Panel replacements, meter upgrades and 100A to 200A service upgrades in King and Pierce counties.
We handle permits, utility coordination and inspection.
EATON · 200AMeter + disconnect
YOUR HOME. READY FOR MORE.200A
01 / A NEW STANDARD FOR HOME POWERSCROLL TO EXPLORE ↓
Panel & meter upgradesPermits & inspectionUtility coordinationClean, planned installation
A REAL BELLEVUE UPGRADE
100A to 200A.
From old to upgraded.
Relocated meter, new Eaton 40-space panel, permits and PSE coordination.
★★★★★
“Had Shudko Electric handle a full 200A panel upgrade at my home in Bellevue, and the experience was excellent from start to finish.”
Himanshu Batra · Google review excerpt
Read the full reviewROOM TO GROW
01 / THE UPGRADEYour home evolved.
Your service should, too.
An older electrical service may need an upgrade before you add an EV charger, heat pump or new living space. We review your existing equipment and planned loads to find the right path.
200A
More service capacity for your next chapter.
Capacity comparison only. Available capacity depends on your home's load calculation and utility approval.
Modern equipment
Replace aging panels and meter equipment with a clean, organized installation.
A bigger picture
Plan for a heat pump, remodel or future additions before the work begins.
ONE COMPLETE UPGRADE
02 / OUR SERVICESFrom the meter.
To the last breaker.
01 /
Panel replacement
Replace your existing breaker panel, reconnect circuits, label the new panel and review grounding and bonding.
A cleaner foundation02 /
Meter upgrade
Update meter equipment and the service connection as required by your project and utility.
Built for the next step03 /
100A → 200A service
A coordinated service upgrade covering the equipment, permits, utility scheduling and inspection.
More capacity for your homeA panel replacement alone does not increase your service amperage. Your estimate identifies exactly what your upgrade includes.
BRANDS WE USE
Equipment for your home.
We use Eaton, SPAN, Generac, Siemens and Square D equipment. Your estimate identifies the equipment selected for your project.
PLAN YOUR HOME’S POWER
Plan your home’s power.
Choose your equipment to estimate demand and explore service options.
How the estimate works
For one home with 120/240V single-phase service. Includes 3 VA per square foot, two kitchen small-appliance circuits and one laundry circuit at 1,500 VA each. Home and appliance loads use 100% of the first 10,000 VA and 40% above that. Heating/cooling uses the larger seasonal load; electric heat and heat-pump backup are counted at 100% for conservative planning. EV charging is added separately at 125% of charging current without load management. An electrician may calculate a different result using the applicable code method and equipment controls.
Assumed appliance inputs: electric range 12 kW, electric tank water heater 4.5 kW, heat pump water heater 1.2 kW, electric tankless 24 kW, electric dryer 5 kW, gas dryer 0.6 kW, gas furnace fan 0.6 kW, heat pump 6 kW, electric heating 15 kW, separate A/C 5 kW, dishwasher 1.2 kW, disposal 0.8 kW, microwave 1.5 kW and separate oven 5 kW. Actual nameplates matter. Gas cooking and gas water heating add no separate allowance. Solar generation does not subtract from demand.
Planning estimate only, not a permit load calculation or a guarantee that an upgrade is required. Final recommendations require actual equipment ratings, all existing and future loads, service/meter verification, local code review and utility approval. EV load management or lower charging current may avoid an upgrade.
View an example dwelling load worksheetWE HANDLE THE DETAILS
03 / THE PROCESSA clear plan.
From start to power on.
One electrical team guiding the work, from the first equipment review through final inspection.
Start planning- 01
Review your home
We assess your panel, meter, service connection and future electrical needs.
- 02
Confirm the scope
You receive a written estimate with equipment, included work and project-specific requirements.
- 03
Coordinate & prepare
We handle permits and coordinate with your utility, including PSE or Seattle City Light when applicable.
- 04
Install & inspect
We schedule the power interruption, complete the installation and arrange the required inspection.
Planned around your home.
Installation timing is confirmed after the site review. Utility approval and scheduling determine when the upgrade can begin.
LOCAL SERVICE. COUNTY-WIDE.
Serving all of
King County and Pierce County.
Panel, meter and service upgrades throughout King County and Pierce County, including cities, towns and unincorporated communities.
Numbers show projects published on our website.
- Algona 0
- Auburn 0
- Beaux Arts Village 0
- Bellevue 1
- Black Diamond 0
- Bothell 0
- Burien 0
- Carnation 0
- Clyde Hill 0
- Covington 0
- Des Moines 0
- Duvall 0
- Enumclaw 0
- Federal Way 0
- Hunts Point 0
- Issaquah 1
- Kenmore 0
- Kent 0
- Kirkland 0
- Lake Forest Park 0
- Maple Valley 0
- Medina 0
- Mercer Island 0
- Milton 0
- Newcastle 0
- Normandy Park 0
- North Bend 0
- Pacific 0
- Redmond 1
- Renton 0
- Sammamish 0
- SeaTac 1
- Seattle 3
- Shoreline 1
- Skykomish 0
- Snoqualmie 0
- Tukwila 0
- Woodinville 0
- Yarrow Point 0
See our work: Shoreline panel upgrades · Seattle electrical projects · Bellevue electrical projects · Redmond electrical projects · SeaTac electrical projects · Issaquah electrical projects · Magnolia, Seattle home & ADU wiring.
Plan an upgrade in your cityWE HANDLE UTILITY COORDINATION
From application
to reconnection.
We coordinate service applications, planned disconnects and reconnections with your electrical utility, including Seattle City Light, Puget Sound Energy and PUDs where applicable.
Seattle City Light
Service applications and disconnect / reconnect coordination.
Puget Sound Energy
Service upgrade planning and utility scheduling.
PUD
Public utility districts
Project-specific coordination with the PUD serving your property.
GOOD QUESTIONS. CLEAR ANSWERS.
Before you upgrade.
Do I need a panel replacement or a full service upgrade?
A replacement addresses the panel itself. Increasing from 100A to 200A may also require meter equipment, service conductors and utility work. We review the existing setup and load requirements before recommending the scope.
Will my power be turned off?
Yes, service work requires a planned interruption. We coordinate the disconnect, installation, inspection and reconnection sequence and discuss the expected outage with you before work begins.
Can I keep my solar or add an EV charger?
Tell us about existing solar, backup power and any planned new equipment. We include those requirements in the site review and identify any additional work in your estimate.
What affects the upgrade price?
Panel and meter location, overhead or underground service, condition of existing wiring, grounding, utility requirements and new circuits all affect the scope. An equipment review helps us provide a project-specific estimate.
LET’S PLAN WHAT’S NEXT
Request your
service upgrade.
Tell us about your project through our Jobber request form. Shudko Electric will contact you to discuss your service options and estimate.
Your request will be managed in Jobber. Submitting a request does not book an appointment.
Start your project request
Continue to our secure Jobber form to enter your contact details and describe the work you need.
Copy this summary into the project details on the Jobber form.